Introduction

Large Tray Filler (RMS)

The RMS is a high speed high precision tray filler which can run at up to 1200 trays per hour even with small cells and deep cells. It features manual or automatic destacking/feeding options even for the thermoformed trays. Unique features with this...
More Detail

Medium Tray Filler (RME)

The RME tray filler runs at a maximum of about 600 trays per hour and has a vibrating table that the trays pass over whilst being fed with compost from above. Distribution is helped by moving and vibrating blades above the tray which makes for a...
More Detail

Medium/Small tray filler (RC7)

The RC7 tray filler is a basic tray filler fitted over a pot filling hopper which feeds soil above the tray and drops the soil onto the tray where it is spread by a rotating paddle. This machine has a belt underneath the tray so can take...
More Detail

Small Tray Filler (RM1500)

The RM1500 Small Tray Filler is designed to be part of the TO55S seeding line and works very well with this seeding machine and can be bought as a complete line or separately.    For the complete line please click More Detail

Compost Mixer (I-MIX)

The Mix-Tec compost mixer has a capacity of 2.3 cubic yards (1800 litres) and is made of stainless steel for long life with automatic control capability. The machine comes with an exit conveyor of 6.5 ft. (2 mt.) length. The mixing is with a double...
More Detail

Vermiculite/Water Line (Large) (VP)

The VP Vermiculite dispenser and water tunnel are fitted over a 9.75 ft. (3mt.) belt with separate excess collection for each section. The vermiculite dispenser turns on and off automatically and is fed by a large overhead hopper. The water tunnel...
More Detail

Tray Stacker On Belt (AP52)

The AP52 starts with a tray stacker suitable for any stacking tray and allows up to 6 trays to be stacked one on top of the next. These stacks when complete are moved on to a buffer belt which holds a number of stacks which are removed manually. The...
More Detail

Tray Washer (I-WASH)

The tray washer runs at a maximum of 1000 trays per hour and is unique in having a "tapping out" section to begin with which vibrates the tray upside down to remove excess compost and dead plants where they were not used. This excess soil falls...
More Detail

Vermiculite/Water Line (Small) (VP1200)

The VP1200 vermiculite line and watering tunnel is designed primarily to be part of the TO55S seedline. The seeder can be used with or without this vermiculite hopper/watering tunnel and also the vermiculite hopper and water tunnel can be used on...
More Detail

Bulk Tray Feeder (I-STACK)

Anybody seeding a lot of trays especially over a large part of the year may benefit from a bulk tray feeder which is designed to eliminate most of the person feeding the trays into the tray filler and seeding line. Bulk tray feeders can be supplied...
More Detail

Tray Palletizer (I-PALLET)

The I-Pallet tray palletizer is designed for people using stacking trays where they normally manually take trays or stacks of trays off the end of the seedline and place them on pallets to be germinated and taken to the greenhouse. This machine...
More Detail

Thermoformed tray destacker and feeder (THERMO-STACK)

This machine has been perfected over a number of years to destack both new and a lot of the used thermoformed trays. To de-nest used trays successfully they have to be of a good quality to begin with but this is possible and we can advise you on how...
More Detail

Tray Bulk Feeder for Stacking Trays (BULK-STACK)

All of our larger vegetable seeding lines come with an inclusive tray destacker which works well and feeds a stack of 5 to 10 trays into the tray filler and seeder. This, however, does require somebody to still be on the end of the seedline feeding...
More Detail