Introduction

Tray Steamer (SF11)

The most effective, practical, safe and cost effective way to sterilize a tray is with heat and steam is an ideal source of heat. Steam generators have been used on nurseries in the USA for some 60 years now and provide steam which is led into a...
More Detail

Compost Mixer (I-MIX)

The Mix-Tec compost mixer has a capacity of 2.3 cubic yards (1800 litres) and is made of stainless steel for long life with automatic control capability. The machine comes with an exit conveyor of 6.5 ft. (2 mt.) length. The mixing is with a double...
More Detail

Tray Washer (I-WASH)

The tray washer runs at a maximum of 1000 trays per hour and is unique in having a "tapping out" section to begin with which vibrates the tray upside down to remove excess compost and dead plants where they were not used. This excess soil falls...
More Detail

Plant Extractor (EXTRACT)

For people using a potting machine; extracting plants from a 'rose pot' can take up a lot of time, damage the plant and is the limiting factor on transplanting speed. The Plant Extractor can be used on our 45 cell trays with or without the insert...
More Detail

Insert Popper Board (POPPER)

This simple board with cross shaped dibbles lines up with the base drain holes of the 45 cell tray and can be easily carried around the nursery and used to push inserts out of the cells at a very early stage to facilitate consolidation of plants to...
More Detail

Tray Carry Racks (RACKS)

Most nurseries have their propagation trays on the ground in order to benefit from under floor heating to aid root development. Our trays feature air root pruning technology which requires trays to be off the ground to enable the air circulation which...
More Detail