Back

098S20I: 98 cell 10 x 20 Inch Tree & Forestry Propagation Tray for Deep 30mm Ellepot

  • Offers minimum contact between tray & insert to allow for maximum air pruning & aeration.
  • Rigid design results in no bending when loaded.
  • Produces a superior root system.
  • Injection molded for long life and ideal for use with automation.
  • Accepts a 30mm wide, 100mm tall Ellepot.
  • Easy and quick to sterilize.
  • The tray features a ‘lug’ option to allow it to slide on T-Rail benching.

Made In:

USA Flag

Suitable For

Citrus, Root Stock

Fruit Trees, Forestry

Details & Features

An excellent propagation tray for automated, semi-automated and manual root-stock propagation nurseries. Suitable for any plant grown from a cutting, such as citrus, some fruit and nut trees and forestry.

This tray is designed to hold 30mm inserts such as Ellepots. The height of the insert is optional, though we do recommend that the height doesn’t exceed the height of the tray by too much to help keep the insert stable for automation purposes. For manual operations, this does not pose an issue.

This tray will dry out quicker than a traditional setup. This means you should water less, but more often.

Exceptional quality and natural roots are created by air pruning by having minimal contact between the insert and the tray. It will fit onto most current benching systems.

The superior root system produced will establish better and support more top growth and calliper increase in the first year.

All our trays are injection molded rigid design resulting in no bending when loaded and a super long working life.

Key Features

Cell Count

98

Outer Dimensions

20" x 10"

Plant Density

63.50 pl/ft.2

Min Order Qty

176 trays

Made In

USA

Variants

Tray

Seeding Information

Cell Count

98

Configuration

7 cells x 14 cells

Plant Density

63.50 pl/ft2

683 pl/m2

Centre-to-centre spacing

1.5"

38mm

Tray/Frame Dimensions

Length at top

21.1"

535mm

Length at bottom

21.1"

535mm

Width

10.6"

268mm

Depth

4.17"

106mm

Cell Dimensions

Cell opening

1.44"

36.5mm

Cell depth

4.17"

106mm

Drainage hole Diameter

n/a

Weight

Tray weight

3.2lbs

1452g

Shipping Statistics

Minimum Order Qty

176 Trays

Trays/Frames

Units per Pallet1

184 if order full truck

176 if ordering partial shipment

Max Pallets/Truck

26

Max Units/Truck

4784

Please Note…

1 Full truck loads can fit more trays per pallet as a dedicated full size 53ft lorry is used for delivery. For partial truck loads, we cannot guarantee the height of the lorry, so pallets must fit into all commercial freight vehicles. If arranging your own transport, please advise us at the earliest opportunity on the internal height of your vehicle.

2 Trays are stacked loose or partly loose to get the maximum number of trays per container. This will result in lower unit shipping cost but also more labor to unload

All statistics and measurements may vary so please check before purchasing, if critical, or ask for sample.

L E Cooke Company, Ca., United States

I think they [Proptek’s propogation containers] are one of the best root pruning pots out there.  For one thing they are in a 10×20″ format which allows us to be able to maximize our bench space, where other types of air pruning pots leave a lot of open bench space.

I also like the way the plant is easily pulled from the pot and then easily put it back into the pot when checking the roots.  I like the injection mold type of pot instead of cheaper thermoformed pots.  They last much longer and are definitely worth the price point.  I think these pots should be more widely used in the industry, therefore making better roots on plants for the whole industry.

Roger Smith, General Manager | TreeSource Citrus Nursery, Ca., United States

The Tall Pot is a system, not just a container. We designed our 4 acres of facility around the pot and tray and saved thousands of dollars on benching because we only needed rails. The 8 cell tray naturally saves labor by reducing repetitive walking and is conducive to mechanized pot filling and conveyors.

On top of that, the injection molded pots and frames are durable and long lasting. We steam sterilize them and expect at least a 6 year life. The best feature is the root pruning and root architecture caused by the pot. There is absolutely no circling of roots and the mass of roots in the pot is amazing.

Our citrus trees take off and come into production sooner than any other pot used in citrus. Choosing this container was the best decision we ever made.

Jose Lima | Wonderful Citrus, CA, United States

I have used the 8 deep pot in frames since 2010 when I had the opportunity to closely participate in its design. The creation of this pot in frame marks a pivoting moment in the conception of modern professional citrus nurseries around the world. Technically speaking the pots are ideal for root development with adequate depth associated with internal ridges which direct the roots down and windows that cause air pruning enabling even more root mass to develop. The frame holding 8 pots make it an easy transition to automation and conveyance which are key features in any professional nursery in the new era of high labour cost. In my point of view, the question of which container to use in a professional citrus nursery has been answered by Proptek and its 8 cell deep pot in frame.

Related products

Recently Viewed Items