Back

162S67D: 162 Cell 26×13″ Tea, Coffee & Banana Propagation Tray (Deep Cell)

  • Standard length to fit on T-Rails.
  • Deep cell and high cell volume offer great versatility.
  • Injection molded for a strong, rigid & long life construction.
  • Designed especially for the Central and South American fruit & tree market.
  • Proptek root technology helps eliminate root circling.
  • Large drain hole for superior drainage.

Made In:

Brazilian Flag

Suitable For

Banana, Coffee, Sugar Cane, Tea

Pineapple, Shrub Liners, Woody Ornamentals

Fruit Trees, Nuts

Details & Features

This tray is well suited to any crop needing a deeper cell such as tea, coffee, bananas, sugar cane and tree liners.

The tray is very durable and lends itself to de-stacking and other automated methods very well. Because of the durable nature of injection molded plastic the tray should last for many many seasons. This ensures a much higher return on investment over more disposable options such as Styrofoam or flimsy thermoformed plastic.

The 162 features root training ribs in the cells to direct roots down and stop them from circling. This means better quality plants that will be more stable and better equipped to quickly take up water and nutrients once planted out.

The cells feature a large draining hole to allow quick drainage to prevent the roots sitting waterlogged.

Key Features

Cell Count

162

Outer Dimensions

26" x 13"

Plant Density

67.04 pl/ft.2

Cell Volume

50 cc

Min Order Qty

4500 trays

Made In

Brazil

Variants

Tray

Seeding Information

Cell Count

162

Configuration

9 cells x 18 cells

Plant Density

67.04 pl/ft2

721.76 pl/m2

Cell Volume

3.05 cu in

50 cc

Centre-to-centre spacing

1.43"

36.40mm

Tray/Frame Dimensions

Length at top

26.4"

670mm

Length at bottom

26.4"

670mm

Width

13.19"

335mm

Depth

2.87"

73mm

Cell Dimensions

Cell opening

1.38"

35mm

Cell depth

2.87"

73mm

Drainage hole Diameter

0.51

Weight

Tray weight

4.1lbs

1861g

Shipping Statistics

Minimum Order Qty

4500 Trays

Trays/Frames

Units per Pallet1

5 if order full truck

5 if ordering partial shipment

Max Units/Container2

4500

Please Note…

1 Full truck loads can fit more trays per pallet as a dedicated full size 53ft lorry is used for delivery. For partial truck loads, we cannot guarantee the height of the lorry, so pallets must fit into all commercial freight vehicles. If arranging your own transport, please advise us at the earliest opportunity on the internal height of your vehicle.

2 Trays are stacked loose or partly loose to get the maximum number of trays per container. This will result in lower unit shipping cost but also more labor to unload

All statistics and measurements may vary so please check before purchasing, if critical, or ask for sample.

Roger Smith, General Manager | TreeSource Citrus Nursery, Ca., United States

The Tall Pot is a system, not just a container. We designed our 4 acres of facility around the pot and tray and saved thousands of dollars on benching because we only needed rails. The 8 cell tray naturally saves labor by reducing repetitive walking and is conducive to mechanized pot filling and conveyors.

On top of that, the injection molded pots and frames are durable and long lasting. We steam sterilize them and expect at least a 6 year life. The best feature is the root pruning and root architecture caused by the pot. There is absolutely no circling of roots and the mass of roots in the pot is amazing.

Our citrus trees take off and come into production sooner than any other pot used in citrus. Choosing this container was the best decision we ever made.

Jose Lima | Wonderful Citrus, CA., United States

I have used the 8 deep pot in frames since 2010 when I had the opportunity to closely participate in its design. The creation of this pot in frame marks a pivoting moment in the conception of modern professional citrus nurseries around the world. Technically speaking the pots are ideal for root development with adequate depth associated with internal ridges which direct the roots down and windows that cause air pruning enabling even more root mass to develop. The frame holding 8 pots make it an easy transition to automation and conveyance which are key features in any professional nursery in the new era of high labour cost. In my point of view, the question of which container to use in a professional citrus nursery has been answered by Proptek and its 8 cell deep pot in frame.

Cliff Beumel | Sierra Gold Nursery, Ca., United States

Simply the best pots, producing the best trees, with the best root structure in the world.

Find out more about how Sierra Gold trees benefit from using Proptek products on this video.